WARNING: Do NOT CLOSE/ABORT the program when writing the new firmware. Doing so WILL DAMAGE/CORRUPT your Seagull device.

Before starting:
Please extract the contents of this file in the root of your harddrive. (ex. drive C:)


When performing the update, please follow these instructions:

1. Disconnect all devices from #REC2.

2. Connect your Seagull device to the USB port of your PC.

3. Start the "Seagull_Update.exe" program.

4. Follow the instructions within the program.

5. After the update has been completed - Power Cycle #REC2.

6. All done - ready to use #REC2. 


Special reminder: When adjusting settings on #REC2 via CONFIG TOOL - camera has to be plugged in and powered ON.